FlameTamer® Camper Bottom
The Camper Bottom is used to contain and elevate the hot coals from the surface elements, ( sand, dirt, water, snow or ice. ) The Bottom is made from 16 gauge sheet metal, two pieces welded together with an air gap to reduce the heat being transferred downward, has built in legs to hold the hot coals 6-1/2" above the ground surface and 1" sides securing the FlameTamer® within it's perimeter.

( FlameTamer® Camper Bottom )

Available in plain steel Stock # F-24B $ 50.00

or stainless steel Stock # F-24BSS $ 116.00

Order by Mail

Back

________________________________________________________
FlameTamer® Camper Insulating Cover
The Insulating Cover, placed on the bottom surface is used to reduce the heat being radiated downward so that a FlameTamer® may be used on a sensitive area where you would prefer to leave no trace. This is only achievable when used in conjunction with and placed under the FlameTamer® bottom.

The Camper Insulating Cover is made of 1" thick fiberglass mat, then wrapped in a fiberglass cloth and then again wrapped in a stainless steel mesh for durability.

( FlameTamer® Camper Insulating Cover )

Stock # F-24IC $ 95.00

Order by Mail

Back

________________________________________________________
FlameTamer® Camper Plate
The Camper Plate is used as a flame deflector and platform so that no special cooking utensils are needed for outdoor cooking on a FlameTamer®, please keep in mind outdoor cookware is preferred. The Plate reduces the heat and deflects the flames away from the chef, the cookware and the utensils, therefor making outdoor cooking on a FlameTamer® as easy as cooking on a kitchen stove.
The camper Plate is made of 1/4" thick plate steel, cut in a half-moon shape 24" long, 12" wide, with handles.

( FlameTamer® Camper Plate )

Available in plain steel Stock # F-24P $ 28.00

or stainless steel Stock # F-24PSS $ 70.00

Order by Mail

Back

________________________________________________________
FlameTamer® Camper Case
The Camper Case is available for the camper unit only, it's made from a mixture of recycled and new plastics. Measuring 27" wide, 27" long, 12" deep, accommodating capacity; Camper unit + Camper Bottom + Camper Spark Screen + Camper Plate + Camper Insulating Cover + some utensils. (accommodates the Camper Unit + accessories )
The Camper Case has a sliding lid without hinges, latches or straps to brake or fail. Built in indention's for strapping down.

( FlameTamer® Camper Case )

Stock # F-24HC $ 65.00

Order by Mail

Back

_______________________________________________________

FlameTamer® Camper Spark Screen
The Spark Screen is designed to contain most of the sparks and bursting
embers within the Camper unit.
Made of stainless steel mesh and 3/16 rod.
Installed with the Camper unit hinge pin handles turned inside, the
Spark Screen slips under the rack resting on the hinge pin handles.

( FlameTamer® Camper Spark Screen)

Stock # F-24CN $ 116.00

Order by Mail

Back